Manufacturer: Aeonmed

Anesthesia and breathing apparatus for infants, children and adults with a built-in respiratory function monitor. It allows inhalation anesthesia with a respiratory mixture of oxygen with nitrous oxide and two liquid anesthetics and ventilation support for the patient. Suitable for all patient groups (newborns / children / adults)

Possibility of low-flow anesthesia. Integrated absorption system that can withstand high sterilization temperatures.
New advanced reliable gas system.
Rotameter illumination.
Work on half-open, half-closed and closed circuits.
Additional features:
CO2 module
Anesthetic gas monitoring
AGSS - active gas collection system
In the absence of a gas supply system, it must be used with a compressor.

Anesthesiology ventilator:
Respiratory circuit: half-open, half-closed and closed
Type: Pneumatically driven fan with electronic control
Ventilation modes: IPPV, PCV, SIMV + PS, PS, Manual
Ventilation Parameters:
- Tidal volume: 20 - 1500 ml
- Respiratory rate: 4 - 100 breaths / min
- Inhalation / expiration ratio: 4: 1 ~ 1: 8
- Pressure regulation: 5 - 70 cm H2O (0.5 - 6 kPa)
- Sensitivity of the stream trigger: 1-15 l / min
- PEEP: 3 - 30 cm H2O
- Pause on inspiration: 0 - 50%

Respiratory Function Monitor:
10.4 "LCD color display
Parameters displayed: real-time graphical curves: pressure, flow and volume, airway pressure, tidal volume, minute volume, maximum inspiratory pressure, oxygen fractions of the inhaled air FiO2, respiratory rate
Alarms: high / low respiratory rate limit, high / low Paw limit, high / low airway pressure limit, high / low minute volume limit, low gas pressure, delivered O2 shutdown, low O2 concentration, power failure, low battery

Anesthesia machine:
Gases: air, O2, N2O; working pressure: 0.28 - 0.6 MPa
Flowmeter: O2, N2O, 4 tubes, 0 - 10 l / min, auxiliary O2 0 - 12 l / min
Patient protection: control of oxygen concentration in the supplied gas, which should not be less than 25%, pressure relief valve at 60 mbar (6 kPa)
Emergency supply O2: 25 - 75 l / min
Absorber

Power supply: 220 V, 50 Hz or backup battery: 24V (minimum: 120 minutes);
Dimensions: 704 x 1403 x 750 mm
Weight: 115 kg (including trolley and 2 evaporators)

Supports 2 vaporizers of anesthetics at choice (Selcatec mount): Halotan, Isofluran, Sevofluran.